Bicycle Repair Made Simple

Drop It Off.
Ride Again.

Tell us what your bike needs, and we'll take care of the rest. From quick repairs to complete servicing, every bike is inspected, repaired carefully and safety-checked before collection.

Every repair is safety-checked before collection

Quick diagnosis

What's Happening With Your Bike?

Tell us what you're noticing and we'll point you to the right repair — from a five-minute puncture fix to a full overhaul.

  • Flat or Puncture

    Tube won't hold air, or you've picked up a puncture on the road.

    Recommended service Tube & Tyre Repair Usually same day
    Book This Fix
  • Brake Problems

    Squealing, spongy levers, or brakes that grab later than they should.

    Recommended service Brake Tuning Usually same day
    Book This Fix
  • Gear Shifting Issues

    Skipping, hesitant or noisy shifts, especially under load.

    Recommended service Gear Adjustment Usually same day
    Book This Fix
  • Wheel Problems

    A wobble, buckle, or looseness you can feel while pedalling.

    Recommended service Wheel Truing Around 1 day
    Book This Fix
  • Chain or Drivetrain Issues

    Noise, stiffness, rust, or a chain that's stretched and worn.

    Recommended service Chain & Drivetrain Service Same day – 1 day
    Book This Fix
  • General Wear, or Not Sure

    Nothing specific — the bike just feels due for a proper once-over.

    Recommended service Full Service / Overhaul 1–3 days
    Book This Fix

Pricing

Know the Cost Before You Drop It Off

Straightforward starting prices for the repairs riders ask for most. Your final price depends on parts and condition — we'll always confirm before we start.

Ask About My Bike
  • Puncture Repair Tube or tubeless repair, tyre and pressure check From $15
  • Brake Tuning Pad check, cable or hydraulic adjustment From $25
  • Gear Adjustment Derailleur indexing and cable tension From $20
  • Chain Service Clean and lubricate, or replace if worn From $18
  • Wheel Truing Spoke tension and rim alignment From $30
  • Full Overhaul Complete strip-down, clean and rebuild From $120

Plan ahead

How Long Will It Take?

A realistic guide to how long common repairs usually take on the bench.

  1. Same Day Puncture Repair
  2. Same Day Brake Tuning
  3. Same Day Gear Adjustment
  4. 1 Day Wheel Truing
  5. 1–2 Days Full Service
  6. 2–3 Days Full Overhaul

Actual turnaround can vary depending on bicycle condition, repair complexity, parts availability and current workshop workload — these are typical guides, not guaranteed completion times.

Service levels

From a single adjustment to a full rebuild — pick the level of attention your bike needs.

01

Quick Fix

For simple repairs and adjustments.

  • Punctures and flats
  • Minor brake or gear tweaks
  • Bolt and quick-release checks
Book a Quick Fix
02

Safety Check

Essential bicycle inspection and tuning.

  • Brakes and gears tested
  • Tyres and wheels inspected
  • Bolts and fasteners checked
Book a Safety Check
03

Complete Service

For regular maintenance and deeper servicing.

  • Full drivetrain clean and lubrication
  • Cable and brake adjustment
  • Wheel and bearing check
Book a Complete Service
04

Full Overhaul

For bicycles needing comprehensive servicing and restoration.

  • Complete strip-down and rebuild
  • Full parts inspection
  • Fresh cables, housing and lubrication
Book a Full Overhaul

What happens next

From Drop-Off to Ride-Ready

  1. 01

    Tell Us What's Wrong

    Tell the workshop what you're experiencing with the bike.

  2. 02

    We Inspect Your Bike

    The bicycle is checked to identify the actual issue.

  3. 03

    We Confirm the Repair

    Required work and relevant costs are confirmed before proceeding, where applicable.

  4. 04

    We Repair & Safety Check

    The repair is completed and the bicycle is checked before collection.

  5. 05

    You Collect & Ride

    Your bicycle is ready to get back on the road.

Real results

A Better Bike Starts Here

Drag the slider to see the kind of difference a proper service makes.

Clean, freshly lubricated drivetrain after servicing
Dirty, grime-covered drivetrain before servicing
Before After
Dirty Drivetrain Clean Drivetrain
Properly tuned brake with aligned pads
Misaligned brake before tuning
Before After
Misaligned Brake Properly Tuned Brake
Fully serviced bicycle setup, ready to ride
Worn bicycle setup before servicing
Before After
Worn Setup Serviced Setup

Between visits

Small Checks. Fewer Problems.

A few simple checks between workshop visits help you notice problems early and keep your bicycle performing reliably.

  • 02

    Brake Pads

    Inspect brake pads regularly for wear. If braking feels weak, noisy, inconsistent, or the pads are heavily worn, get the bicycle checked.

  • 03

    Keep the Drivetrain Clean

    Keep the chain, cassette and chainrings reasonably clean and properly lubricated. A clean drivetrain shifts more smoothly and wears less.

  • 04

    Watch Your Gear Shifting

    Delayed shifting, skipping gears, chain noise or difficulty reaching certain gears can mean the setup needs adjustment.

  • 05

    Check Bolts & Wheel Retention

    Before riding, especially after maintenance, make sure fasteners and wheel-retention mechanisms are properly secured.

  • 06

    Before a Long Ride

    Give the bike a quick check: tyres, brakes, chain, wheels and quick releases. If something feels unusual, get it checked first.

Good to know

Frequently Asked Questions

Ready to Get Your
Bike Back on the Road?

Arrange a repair, ask about an issue, or organise a drop-off — whatever's easiest for you.